Brother Printers
WhiteBoard
IP PBXs
D-Link DGS-F1026P 24-Port 1000Mbps PoE Switch with 2 SFP Ports 250 Meter support
Key Features
Brand: D-Link
24 10/100/1000 Mbps Ethernet ports
2 SFP Uplink
250 W PoE budget
Support IEEE802.3af/at up to 30W per port to PoE compatible devices
Support transmission Data/PoE up to 250m cable length (Port 1-8 with Extend enabled)
6KV Lightning protection
Smart Features: Extend, VLAN, QoS and PoE
Plug & Play Installation
1 Year Warranty
D-Link DGS-F1026P 24-Port 1000Mbps PoE Switch: High-Speed Long-Range Infrastructure for Enterprise Networks
Modern high-density business setups and multi-device surveillance grids require hardware that seamlessly delivers massive bandwidth alongside deep electrical power. The D-Link DGS-F1026P 24-Port 1000Mbps PoE Switch with 2 SFP Ports stands out as a robust plug-and-play solution built exactly for these heavy infrastructure requirements. Bringing full Gigabit connectivity across 24 dedicated copper endpoints and pairing them with extended-range transmission capability, this hardware clears data bottlenecks while simplifying dense equipment wiring.
Why Choose the D-Link DGS-F1026P Gigabit PoE Switch
For deployments requiring immediate, high-volume device connections—without the complex setup steps or software licensing fees of enterprise-managed hardware—the D-Link DGS-F1026P serves as a highly efficient core asset.
Extended 250-Meter Long-Reach PoE
Standard network infrastructure drops signal integrity and power stability past a rigid 100-meter ceiling. The D-Link DGS-F1026P bypasses this physical limit via its built-in Extend Mode. By managing front-panel hardware selectors, you can safely deploy hardware up to 250 meters away. This eliminates the expense of installing mid-way connection boosters or separate electrical drops when placing remote cameras or access hubs along peripheral fences.
Massive Port Density and 250W PoE+ Budget
The physical architecture features a powerful, high-density port allocation engineered to carry demanding workloads concurrently:
- 24 Dedicated Gigabit PoE Ports: Ports 1 through 24 fully comply with IEEE 802.3af and IEEE 802.3at standards, pumping out up to 30 Watts per port within a heavy-duty 250-Watt total system budget to power high-draw hardware easily.
- 2 Dedicated Gigabit SFP Uplink Ports: Independent Small Form-Factor Pluggable lines provide an unhindered fiber-optic pipeline back to your primary data center or central server room, keeping local device connections open.
Smart AI Hardware Control Switches
To deliver advanced system enhancements without requiring a complicated administrative web interface, the front panel includes specialized DIP switches to adjust operations instantly:
- Extend: Tailors port signaling to guarantee seamless power delivery and connection integrity across the full 250-meter range.
- VLAN: Isolates ports 1 through 24 from one another, halting network loop storms instantly while boosting internal data security.
- QoS: Automatically prioritizes critical application data, ensuring real-time video surveillance streams remain perfectly smooth without frame drops.
- PoE: Activates automated smart monitoring that checks port responsiveness, automatically cutting off and restarting power to any non-responsive attached device to reduce manual IT field reboots.
Heavy-Duty System Protection and Build Quality
Operating physical network systems in demanding environments requires durable hardware defense. The D-Link DGS-F1026P is engineered from the ground up for maximum system durability.
Integrated 6 kV Lightning Protection
Sudden voltage spikes or outdoor electrical storms can easily ruin sensitive networking equipment. D-Link safeguards your core infrastructure investment by building robust 6 kV surge protection directly into the ports of the switch, reducing hardware failures caused by unpredictable lightning hits on extended runs.
Intelligent Thermal Cooling and Metal Chassis
To manage high heat levels under full 250-Watt PoE loads, the switch incorporates smart internal cooling fans that maintain safe working temperatures. Encased inside a rugged, heavy-duty 1U industrial metal chassis, the hardware supports stable desktop surface placement as well as standard installation inside standard equipment racks.
Technical Specifications Table
| Metric Feature | Specification Detail |
|---|---|
| Port Configuration | 24 x 10/100/1000 Mbps PoE Ports + 2 x Gigabit SFP Uplink Slots |
| PoE Standards Supported | IEEE 802.3af / IEEE 802.3at Compliant |
| Total System Power Budget | 250 Watts total capacity (Up to 30W per port) |
| Switching Fabric Capacity | 52 Gbps non-blocking performance |
| Packet Forwarding Rate | 38.7 Mpps wire-speed performance |
| Max Extended Range | Up to 250 meters at modified speed |
| Surge Rating Defense | 6 kV integrated hardware protection |
| Form Factor Form | Rackmountable 1U Industrial Metal Frame |
Frequently Asked Questions (FAQs)
What happens to the Gigabit speeds when Extend Mode is turned on?
When you activate the 250m Extend Mode using the physical hardware toggle, the targeted PoE ports shift their speed configuration down to 10 Mbps. This reduction ensures the data and power signals stay perfectly stable over the long 250-meter cable line. A 10 Mbps connection is more than wide enough to cleanly support high-definition 1080p and 4K IP security camera video feeds.
What is the advantage of having SFP uplink ports over standard copper?
SFP slots let you add fiber-optic transceiver modules to the switch. Standard copper Ethernet cables degrade after 100 meters, but fiber-optic lines can run across kilometers without signal loss. This design allows you to connect separate buildings or distant floors back to your core server.
